PA-SERIES Features & Advantages

 

 

 

Features of the Components and the safety Unit PA-Series

Developed specifically for a centrifugal atomizing humidifier, a driving motor driven by a high-performance condenser is selected. In case of temperature rise caused by malfunction of the motor, the temperature control unit activates at 115°C to protect the motor from danger and ensure safety.

 

 

A quiet, damp and waterproof motor that can be used safely in a highly humid place. The selected motor is Korean patent pending.

 

 

 

Designed with an anisotropic magnet to provide high efficiency, high performance, and safe structure. In case of temperature rise caused by malfunction of the pump, the temperature control unit activates at 80°C to protect the pump from danger and ensure safety.

 

 

A removable, highly efficient stainless filter is installed at the lower part of the body, allowing efficient filtering of dust and other materials coming into the humidifier. It also makes cleaning easier.

 

 

Installed within the water bank, the ultra-mini automatic water-supplying unit has the capability to prevent a back current and block of the water supply. Its structure allows you to connect the water supplying connection to the flexible hose easily with hands without using any tools.

 

 

 

PA-SERIES Installation and usage
 

Changing spraying direction and angle


The spraying angle may be adjusted from 45° to 180°, depending on how many elbows are combined, and the spraying direction may also be adjusted freely according to the insertion direction.

If humidifying particles are not purged

Check the underwater pump is secured at the stand of the lower part of the humidifier.

1. Remove the filter cover. (Use your hands to pull it off easily.)
2. Rotate the circular cap to the left to remove it.
3. Remove the rotator with your hands or pliers. Clean off any moss, slime and iron from the rotator wings or the magnet. Use clean cloth to remove iron stuck to the magnet.
4. Remove any moss, slime, and other materials from the pump body.
5. Assemble the humidifier by repeating the procedure in reverse order and operate it.

When water is not supplied within the water tank

1. Separate the water tank from the body of the humidifier
2. Release the plastic nut for securing the ball tap at the connection for the water supply.
3. Detach the ball tap to remove the filter within the hole of the connection for the water supply.
4. Remove any moss, slime, and other materials from the filter.
5. Assemble it by repeating the procedure in reverse order, and open the tap to check if water is properly supplied within the water tank.